模块化和可扩展的设计
可现场更换的套盖允许在现场配置或重新配置 FlexDock 基座，以满足不断变化的需求。（有关详细信息，请参阅 FlexDock 系统附件指南。）

面向未来的设计
技术更新换代？ 只需调换可互换的设备或电池套盖。现有的底座系统基础设施仍适用于新一代产品。

专为大规模部署设计
FlexDock 专为大规模部署而设计。其紧凑设计提供了高密度的对接解决方案，充分利用标准的 19 英寸 IT 机架解决方案。

菊花链连接可降低成本
具有 100Base-T 以太网菊花链连接功能，可降低安装成本并简化以太网基础设施。

产品详细信息
对接化繁为简。非常简单，而且成本效益高。霍尼韦尔 FlexDock 解决方案是一款共享的底座、充电和数据通信解决方案，适用于霍尼韦尔移动计算机、打印机和电池。
FlexDock 让您可以灵活地设计对接系统，从而充分满足您目前及未来的需求。两套盖或四套盖底座，套盖可互换，方便配置底座系统基础设施以满足您不断变化的需求
其他优点包括：
•经过优化，可进行高密度安装
•双基座或四基座支持可选的 100Base-T 以太网连接，可以让您的网络基础架构实现高速数据通信
•“菊花链连接”功能允许最多 10 个基座（以及多达 40 台移动设备）共享一个主机网络端口，从而大大减少布线需求
•电缆管理系统可减少杂乱
借助可选的霍尼韦尔机架安装系统，FlexDock 基座可安装在标准的 19 英寸设备机架中。它可以在非常小的空间中轻松进行垂直叠加对接。机架可以水平安装或向上或向下倾斜 15 度，以提高对接设备的可视性和可访问性。

MECHANICAL
Dimensions: (L x W x H) & Weight
(Base heights vary slightly based on type of cup used)
Desktop Base: 23.1 cm x 12.7 cm x 4 cm (9.10 in x 5.0 in x 1.58 in); 541.5 g (19.1 oz)
Dual Base: 23.1 cm x 12.7 cm x 4 cm (9.10 in x 5.0 in x 1.58 in);
Weight: 553 g (18.8 oz) or 654.9 g (23.1 oz) with Ethernet
Quad Base: 44.45 cm x 12.7 cm x 4 cm (17.5 in x 5.0 in x 1.58 in);
Weight: 1,156.7 g (40.8 oz) or 1,275.7 g (45 oz) with Ethernet
A base with cups installed will range from 6.4 cm to 11.4 cm height (2.5 in to 4.5 in).
Power Supply (Dual/Desktop Base): 13 cm x 7.6 cm x 3.3 cm (5.1 in x 3.0 in x 1.3 in); 272.2 g (9.6 oz)
Power Supply (Quad Base): 18 cm x 5.8 cm x 3.9 cm (7.09 in x 2.27 in x 1.52 in); 688.9 g (24.3 oz)
Computer cups and battery cups are 10.6 cm long x 12.5 cm wide (4.18 in x 4.94 in) and have a total height from 4.8 cm to 10.2 cm (1.9 in to 4.0 in); Weight ranges from 90.7 g to 124.8 g (3.2 oz to 4.4 oz).

ENVIRONMENTAL
Certifications:
Safety: cULus Listed (pending), DEMKO (pending)
EMC: Class B - FCC/ICES/EN (Desktop Base; Dual-Base and Quad-Base Charge-only configurations); Class A - FCC/IC/EN (Dual-Base and Quad-Base Ethernet configurations)
Environmental Rating: EU Directives-WEEE, RoHS, Packaging and Waste Packaging

SYSTEM ARCHITECTURE
Power
Recharging Time: Typically less than 4 hours; maximum 6 hours for fully discharged packs.
Accessories
Communications and Charging Dock:
Cups – Mobile Computer: Accommodates one mobile computer; provides charging and data communication connectivity status; front-mounted Ethernet-connectivity indicator (used where applicable)
Cups – Mobile Printer: Accommodates one mobile printer; provides charging connectivity status
Cups – Computer or Printer Battery Pack: Accommodates up to two battery packs; provides charging; front-mounted Charge Status indicator for each pack.
Adapters:
Mounting Options – Rack Mounting Kit: Shelf for mounting one Quad Base, with Power Supply Shelf underneath. Options for mounting horizontal; adapters for 15-degree upward or downward angle mounting.

COMMUNICATIONS INTERFACE
Ethernet:
Dual and Quad Base: Optional Ethernet 100Base-T Switch; RJ45 Uplink and Downlink ports
Desktop Base: USB 2.0 Full Speed, Standard USB-A Host port, Micro USB-B Client port; Desktop Base accepts optional Ethernet 100Base-T or 56 Kbps Analog Modem modules via USB Host port
Contact your Intermec PartnerNet Reseller or Sales Representative for full information on available configurations.